|
|
|
|
|
|
|
|
MODEL:TVLC-4 |
|
|
TENDERIZER |
| As for the good quality we can't tell without tenderizer. The tenderizer is equipped with high quality roller, it can help to prevent from overlapped plywood. |
 |
MAIN PARTS |
|
This part include defect scanning, clipper, jointing section. Defect scanning, clipper. Using PLC elector to reduce odd core veneer to minimum wasting. Jointing Section In this machine, the core veneer is jointed and controlled by electronic detector. It has precise and solid joint spot to prevent cracked after drying. It is equipped with hot melt glue and polyester yarn for supplementary joint. |
|
|
STACKER |
|
The stacker is designed for careful handling of the sheets. To make the veneers stack orderly and keep well-arranged, stacker is equipped with two pieces of cylinder. |
|
|
|
|
|
|
|
| Model | TVLC-4 | |
| Length of Knife | 1350mm | |
| Working Veneer Core Width | 968mm to 1270(3ft. to 4ft) | |
| Veneer Core Thickness | 1.2mm to 3.2mm | |
| Feeding Speed | 30.5m/min (Constant) | |
| Motor For | Feeding | 3.7KWx1 |
| Glue Applicator | 0.2KWx2 | |
| Full-Size Clipping | 1.5KWx1 | |
| Heaters | 6.5KWx2 | |
| Cooler Unit | 0.15KWx1 0.7KWx1 | |
| Fan | 0.75KWx2 | |
| Dust Fan | 0.75KWx1 | |
| Stacker Table Lifting | 2.2KWx1 | |
| Stacker Feeding | 0.4KWx1 | |
| Tenderizer | 2.2KWx1 | |
| Area Occupied | 3.7Mwx13.52ML | |
| Machine Weight | N.W. 8500KG | |
| Measurement | 59M3 | |
|
Optional Accessories : Air compressor with 3.7KW motor (require 7kg/cm2 air, pressure 1200 litres/min. free air) |
|
|
