MODEL:TVLC-8

MAIN PARTS

 

This part include defect scanning, clipper, jointing section
Defect scanning, clipper 
Using PLC  to reduce odd core veneer to minimum wasting.
Jointing Section
In this machine, the core veneer is jointed and controlled by electronic detector, it has precise and solid joint spot, to prevent cracked after drying, it is equipped with hot melt glue and polyester yarn for supplementary joint.
STACKER
Sheets are clipped by belts for  the fixed position so that it can keep the sheets neat.

SPECIFICATIONS
Model TVLC-8
Length of Knife 2650mm
Working Veneer Core Width 1900mm to 2500(6ft. to 8ft)
Veneer Core Thickness 1.5mm to 4.0mm
Feeding Speed 22m/min (Constant)
Motor For Separate 2.2KWx1
Full-Size Clipping 3.7KWx1
Heaters 3.5KWx2
Cooler Unit 0.7KWx1
Fan 1.5KWx2
Stacker Table Lifting 2.2KWx1
Stacker Feeding 0.75KWx2
Tenderizer 7.5KWx1
Area Occupied 6.5Mwx13.52ML
Machine Weight N.W. 16500KG
Measurement 120M3

Optional Accessories : Air compressor with 3.7KW motor (require 6kg/cm2 air, pressure 1200 litres/min. free air)